Difference between revisions of "Tools"

From PaparazziUAV
Jump to navigation Jump to search
Line 3: Line 3:
[[Image:Logic_Analyzer.jpg|thumb|right]]
[[Image:Logic_Analyzer.jpg|thumb|right]]


If you need to analyze (debug) a data stream, for example a ppm signal, directly on the hardware, you can use the following tool:
Helpful to analyze/debug data streams or measure ppm signal length.


http://www.saleae.com/home/
[http://www.saleae.com/home/ saleae] (works with linux)


It works on Linux.
The original costs about 120€, china clones begin at 10€.


<br style="clear:both">
There is also an open source support for a lot of different logic analyzers (china clones) [http://sigrok.org/wiki/Main_Page sigrok]


== V-Cable ==
== V-Cable ==

Revision as of 15:08, 25 October 2013

Logic Analyzer

Logic Analyzer.jpg

Helpful to analyze/debug data streams or measure ppm signal length.

saleae (works with linux)

The original costs about 120€, china clones begin at 10€.

There is also an open source support for a lot of different logic analyzers (china clones) sigrok

V-Cable

V-Kabel.jpg

If you lack servo outputs on paparazzi this V-cable can be useful. Using it you can control two aileron servos on one servo output. Or two or even four flaps on one output. All servos can be configured separately (reverse, neutral, turn angle, etc.).