Difference between revisions of "Tiny GPS config"

From PaparazziUAV
Jump to: navigation, search
Line 8: Line 8:
 
Required Cables:  
 
Required Cables:  
 
<ol>
 
<ol>
<li>FTDI Serial Adapter Cable
+
<li>[[Image:Ftdicbl.jpg]]FTDI Serial Adapter Cable
<li>8-pin Molex Picoblade connector to 6-pin FTDI cable
+
<li>[[Image:Gpscbl.jpg]]8-pin Molex Picoblade connector to 6-pin FTDI cable
 
</ol>
 
</ol>
 
Steps:
 
Steps:

Revision as of 19:41, 20 April 2008

Prerequisites:

  1. Must have loaded USB Boot Loader software
  2. Must have loaded "tunnel"
  3. Must have downloaded and installed u-center
  4. Must have downloaded, uncompressed the LEA-4P config file

Required Cables:

  1. Ftdicbl.jpgFTDI Serial Adapter Cable
  2. File:Gpscbl.jpg8-pin Molex Picoblade connector to 6-pin FTDI cable

Steps:

  1. Connect FTDI cable + 8-pin Molex adapter to USB on your laptop
  2. Connect 8-pin Molex to "serial1" on Tiny2.11
  3. Power on Tiny2.11
  4. Start u-center application
  5. set connection 'baudrate' to 9600BPS (LEA-4P factory default)
  6. Menu: Tools/GPS Config select the file to upload (LEA-4P file downloaded)
  7. Click File >> GPS button to send the file to the GPS
  8. About 2/3 the way through it will stop. At this point change 'baudrate' to 38,4000 connection and it will continue and finish

BACK