Difference between revisions of "Theory of Operation"
(→Control Loops Writeup) |
(Added link to Youtube video explaining PID.) |
||
(14 intermediate revisions by 5 users not shown) | |||
Line 1: | Line 1: | ||
− | |||
− | |||
== Control Loops Writeup == | == Control Loops Writeup == | ||
− | Excellent explanation of the [[Control Loops]] | + | Excellent explanation of the [[Control Loops]] and some basics on [[ControlTheory|Control Theory]] behind it. |
== PID == | == PID == | ||
Line 12: | Line 10: | ||
See more on Wikipedia: [http://en.wikipedia.org/wiki/PID_controller PID Controller] | See more on Wikipedia: [http://en.wikipedia.org/wiki/PID_controller PID Controller] | ||
+ | |||
+ | PID explained by RC Model Reviews: [https://youtu.be/0vqWyramGy8 What PIDs do and how they do it] | ||
Paparazzi uses PID controllers on all loops but many of the I and D terms are not fully implemented as they are often unnecessary or difficult to tune. Below are some examples of the PID implementations in Paparazzi. There is a [[Control Loops|graphical description of the control loops]] as well. | Paparazzi uses PID controllers on all loops but many of the I and D terms are not fully implemented as they are often unnecessary or difficult to tune. Below are some examples of the PID implementations in Paparazzi. There is a [[Control Loops|graphical description of the control loops]] as well. | ||
=== Roll Rate === | === Roll Rate === | ||
− | {{Box Code|In <b>sw/airborne/ | + | {{Box Code|In <b>sw/airborne/firmwares/fixedwing/stabilization/stabilization_attitude.c</b> we define the roll rate loop:| |
float cmd <nowiki>=</nowiki> throttle_dep_pgain * ( err + h_ctl_roll_rate_igain * roll_rate_sum_err / H_CTL_ROLL_RATE_SUM_NB_SAMPLES + h_ctl_roll_rate_dgain * d_err); | float cmd <nowiki>=</nowiki> throttle_dep_pgain * ( err + h_ctl_roll_rate_igain * roll_rate_sum_err / H_CTL_ROLL_RATE_SUM_NB_SAMPLES + h_ctl_roll_rate_dgain * d_err); | ||
}} | }} | ||
Line 22: | Line 22: | ||
=== Roll Attitude === | === Roll Attitude === | ||
− | {{Box Code|In <b>sw/airborne/ | + | {{Box Code|In <b>sw/airborne/firmwares/fixedwing/stabilization/stabilization_attitude.c</b> we define the roll attitude gain loop:| |
float err <nowiki>=</nowiki> estimator_phi - h_ctl_roll_setpoint; | float err <nowiki>=</nowiki> estimator_phi - h_ctl_roll_setpoint; | ||
float cmd <nowiki>=</nowiki> - h_ctl_roll_attitude_gain * err- h_ctl_roll_rate_gain * estimator_p+ v_ctl_throttle_setpoint * h_ctl_aileron_of_throttle; | float cmd <nowiki>=</nowiki> - h_ctl_roll_attitude_gain * err- h_ctl_roll_rate_gain * estimator_p+ v_ctl_throttle_setpoint * h_ctl_aileron_of_throttle; | ||
}} | }} | ||
− | |||
=== Pitch Angle === | === Pitch Angle === | ||
− | {{Box Code|In <b>sw/airborne/ | + | {{Box Code|In <b>sw/airborne/firmwares/fixedwing/stabilization/stabilization_attitude.c</b> we define the pitch angle loop:| |
float err <nowiki>=</nowiki> estimator_theta - h_ctl_pitch_setpoint; | float err <nowiki>=</nowiki> estimator_theta - h_ctl_pitch_setpoint; | ||
float d_err <nowiki>=</nowiki> err - last_err; | float d_err <nowiki>=</nowiki> err - last_err; | ||
Line 39: | Line 38: | ||
=== Navigation === | === Navigation === | ||
− | {{Box Code|In <b>sw/airborne/ | + | {{Box Code|In <b>sw/airborne/firmwares/fixedwing/stabilization/stabilization_attitude.c</b> we define the navigation loop:| |
float err <nowiki>=</nowiki> estimator_hspeed_dir - h_ctl_course_setpoint; | float err <nowiki>=</nowiki> estimator_hspeed_dir - h_ctl_course_setpoint; | ||
NormRadAngle(err); | NormRadAngle(err); | ||
Line 49: | Line 48: | ||
=== Climb Rate === | === Climb Rate === | ||
− | {{Box Code|In <b>sw/airborne/ | + | {{Box Code|In <b>sw/airborne/firmwares/fixedwing/guidance/guidance_v_n.c</b> we compute the desired climb rate:| |
v_ctl_altitude_error <nowiki>=</nowiki> estimator_z - v_ctl_altitude_setpoint; | v_ctl_altitude_error <nowiki>=</nowiki> estimator_z - v_ctl_altitude_setpoint; | ||
v_ctl_climb_setpoint <nowiki>=</nowiki> v_ctl_altitude_pgain * v_ctl_altitude_error + v_ctl_altitude_pre_climb; | v_ctl_climb_setpoint <nowiki>=</nowiki> v_ctl_altitude_pgain * v_ctl_altitude_error + v_ctl_altitude_pre_climb; | ||
}} | }} | ||
Here we only use the Proportional term though a Derivative would be useful as climb rate is not well damped. An integral term may prove useful if well-implemented. The last term <b><tt>v_ctl_altitude_pre_climb</tt></b> represents the desired constant climb rate needed to follow a 3-dimensional navigation path. This term is zero for level flight, altitude maintenance, and commanded altitude changes. | Here we only use the Proportional term though a Derivative would be useful as climb rate is not well damped. An integral term may prove useful if well-implemented. The last term <b><tt>v_ctl_altitude_pre_climb</tt></b> represents the desired constant climb rate needed to follow a 3-dimensional navigation path. This term is zero for level flight, altitude maintenance, and commanded altitude changes. | ||
− | {{Box Code|Then we compute the throttle response:| | + | {{Box Code| Then we compute the throttle response:| |
float err <nowiki>=</nowiki> estimator_z_dot - v_ctl_climb_setpoint; | float err <nowiki>=</nowiki> estimator_z_dot - v_ctl_climb_setpoint; | ||
float controlled_throttle <nowiki>=</nowiki> v_ctl_auto_throttle_cruise_throttle + v_ctl_auto_throttle_climb_throttle_increment * v_ctl_climb_setpoint | float controlled_throttle <nowiki>=</nowiki> v_ctl_auto_throttle_cruise_throttle + v_ctl_auto_throttle_climb_throttle_increment * v_ctl_climb_setpoint | ||
Line 62: | Line 61: | ||
}} | }} | ||
− | + | [[Category:Software]] [[Category:User_Documentation]] | |
− | [[ | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | [[ | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− |
Latest revision as of 11:51, 15 April 2016
Contents
Control Loops Writeup
Excellent explanation of the Control Loops and some basics on Control Theory behind it.
PID
Paparazzi uses common Proportional Integral Derivative (PID) control for stability and navigation. PID is probably the most commonly used feedback control design as it is simple to implement and intuitive to operate. PID controllers use three terms operating on the measured error to produce a control output. If u(t) is the control signal sent to the system, y(t) is the measured output and r(t) is the desired output, and tracking error , a PID controller has the general form
The desired closed loop dynamics are obtained by adjusting the three parameters , and , often iteratively by "tuning" and without specific knowledge of a plant model. Stability can often be ensured using only the proportional term in well damped systems. The integral term compensates for steady long-term errors, and the derivative term is used to provide damping to reduce oscillation.
See more on Wikipedia: PID Controller
PID explained by RC Model Reviews: What PIDs do and how they do it
Paparazzi uses PID controllers on all loops but many of the I and D terms are not fully implemented as they are often unnecessary or difficult to tune. Below are some examples of the PID implementations in Paparazzi. There is a graphical description of the control loops as well.
Roll Rate
File: In sw/airborne/firmwares/fixedwing/stabilization/stabilization_attitude.c we define the roll rate loop: |
float cmd = throttle_dep_pgain * ( err + h_ctl_roll_rate_igain * roll_rate_sum_err / H_CTL_ROLL_RATE_SUM_NB_SAMPLES + h_ctl_roll_rate_dgain * d_err); |
Note that the roll Pgain is variable with throttle and multiplies through the entire equation affecting the I and D terms as well for ease of tuning.
Roll Attitude
File: In sw/airborne/firmwares/fixedwing/stabilization/stabilization_attitude.c we define the roll attitude gain loop: |
float err = estimator_phi - h_ctl_roll_setpoint; float cmd = - h_ctl_roll_attitude_gain * err- h_ctl_roll_rate_gain * estimator_p+ v_ctl_throttle_setpoint * h_ctl_aileron_of_throttle; |
Pitch Angle
File: In sw/airborne/firmwares/fixedwing/stabilization/stabilization_attitude.c we define the pitch angle loop: |
float err = estimator_theta - h_ctl_pitch_setpoint; float d_err = err - last_err; last_err = err; float cmd = h_ctl_pitch_pgain * (err + h_ctl_pitch_dgain * d_err) + h_ctl_elevator_of_roll * fabs(estimator_phi); |
Here we use only Proportional as the Derivative is always set to zero. An integral term could prove useful here. Aircraft pitch response is normally very well damped. Those with "plank" style aircraft or other pitch-sensitive designs may benefit from implementing a gyro-based D term.
File: In sw/airborne/firmwares/fixedwing/stabilization/stabilization_attitude.c we define the navigation loop: |
float err = estimator_hspeed_dir - h_ctl_course_setpoint; NormRadAngle(err); float speed_depend_nav = estimator_hspeed_mod/NOMINAL_AIRSPEED; Bound(speed_depend_nav, 0.66, 1.5); float cmd = h_ctl_course_pgain * err * speed_depend_nav; |
Here we only use the Proportional term though a Derivative would be useful as navigation is not well damped. Note that an Integral term cannot be used for navigation without accurate and reliable wind information and the necessary implementation of wind data. Note however that we increase/reduce the commanded bank angle for navigation based on the ground speed. This reduces "hunting" on upwind legs, keeps the navigation tight on fast downwind legs and helps keep circles round in a crosswind.
Climb Rate
File: In sw/airborne/firmwares/fixedwing/guidance/guidance_v_n.c we compute the desired climb rate: |
v_ctl_altitude_error = estimator_z - v_ctl_altitude_setpoint; v_ctl_climb_setpoint = v_ctl_altitude_pgain * v_ctl_altitude_error + v_ctl_altitude_pre_climb; |
Here we only use the Proportional term though a Derivative would be useful as climb rate is not well damped. An integral term may prove useful if well-implemented. The last term v_ctl_altitude_pre_climb represents the desired constant climb rate needed to follow a 3-dimensional navigation path. This term is zero for level flight, altitude maintenance, and commanded altitude changes.
File: Then we compute the throttle response: |
float err = estimator_z_dot - v_ctl_climb_setpoint; float controlled_throttle = v_ctl_auto_throttle_cruise_throttle + v_ctl_auto_throttle_climb_throttle_increment * v_ctl_climb_setpoint + v_ctl_auto_throttle_pgain * (err + v_ctl_auto_throttle_igain * v_ctl_auto_throttle_sum_err); and pitch response float v_ctl_pitch_of_vz = v_ctl_climb_setpoint * v_ctl_auto_throttle_pitch_of_vz_pgain; |