TWOG/add i2c1

From PaparazziUAV
Revision as of 04:21, 5 May 2012 by Martinmm (talk | contribs) (Created page with "Category:Hardware == Add 2nd I2C port to Tiny/TWOG == It can be handy to have a second I2C port on the TWOG v1.00 or Tiny v2.11. This allows to separate flight sensitive se…")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Add 2nd I2C port to Tiny/TWOG

It can be handy to have a second I2C port on the TWOG v1.00 or Tiny v2.11. This allows to separate flight sensitive sensors (e.g. IMU) from payload sensors.

ADC2/J8 can easily be modified to have the same pinout as the original I2C/J6 port.

remove R12
replace R13 with a 10k resistor
cut the trace between R13 and R15
connect the (then) open end of R13 with 3.3V at R17
connect J8_IN_ADC_6 with J7_BOOT (SDA1)
connect J8_IN_ADC_5 with J2_CTS (SCL1)
secure the thin wire with small dots of hot glue

The original I2C/J6 is i2c0 and ADC2/J8 becomes i2c1.

Modification

Twog v100 i2c1 mod.jpg