TU Delft - Lasergame with Autonomous AR Drone

From PaparazziUAV
Jump to navigation Jump to search
TU Delft Minor Robotics: Quadrotor Group 1

Introduction

Our focus in the development of the autonomous AR.Drone is focused on the lasergaming industry. In this field our goal is to implement the AR.drone as a observing and later on possibly participating member of the game. We feel that there is quite a lot of potential for an implementation of the quad rotor.

In our project we have chosen to work with the Standard Development Kit (SDK), which is already present on the AR.Drone. To get this done we needed to combine Paparazzi with the programs JSBSim and FlightGear.

About the AR Drone 2.0

Specifications[1]

Getting Started

This project is developed by using Linux, ubuntu. Following these steps are at your own risk. You can only perform these steps if you use ubuntu. Before the developing part will start, the following installations are required:

  • Download the SDK from Ardrone.org
  • Download and install Paparazzi, see the installation guide for help: [2] Do not follow the instructions from 4), we use another cross-compiler for this project.
  • Follow the instructions described in the "Getting the cross-compiler".

Getting the cross-compiler

  1. Download the cross-compiler from [3]
  2. Open the terminal and direct to your home directory.
  3. Type the following commands (without the $):
$ sudo chmod +x codesetup.sh
$ sudo ./codesetup.sh

Wait a few minutes and you're done!

The Repository

Developers often use a repository for developing their software projects. When using a repository, developers can upload and download the code developed for the project. This allows multiple people to work on the same project at the same time without getting in eachother's way. It is in this case very useful and we will use Github, a populair open source repository site. For beginners, please read the manual to setup Github for Ubuntu:

Manuals and guides