Difference between revisions of "STLink"
Jump to navigation
Jump to search
| Line 30: | Line 30: | ||
echo PATH=\"$PATH:/opt/stlink\" >> /etc/environment | echo PATH=\"$PATH:/opt/stlink\" >> /etc/environment | ||
source /etc/environment | source /etc/environment | ||
'''FIMXE, environment variable doe not work/st-flash is not found, works wenn called with ./st-flash | '''FIMXE, environment variable doe not work/st-flash is not found, works wenn called with ./st-flash , anyone has a idea ? ''' | ||
USB permission | USB permission | ||
| Line 36: | Line 36: | ||
udevadm control --reload-rules | udevadm control --reload-rules | ||
For ST-LinkV1 take a look at the readme.txt before first plug in with PC ! | |||
==Howto== | ==Howto== | ||
Revision as of 12:46, 8 September 2013
SWD can be used to upload the firmware to stm32fx MCU without a bootloader.
A ST-Link is needed, any stm32-discovery board has a ST-LinkV2 on it (starts @ 8€).
A standard ST-Link costs from 17€
Needed Tools
st_flash and st_util need to be installed, compiled from source (https://github.com/texane/stlink) Libusb 1.0, autogen is required.
git clone git://github.com/texane/stlink.git cd stlink ./autogen.sh ./configure make sudo su mkdir /opt/stlink cd /opt/stlink cp /home/user/stlink/st-flash /opt/stlink cp /home/user/stlink/st-util /opt/stlink echo PATH=\"$PATH:/opt/stlink\" >> /etc/environment source /etc/environment
FIMXE, environment variable doe not work/st-flash is not found, works wenn called with ./st-flash , anyone has a idea ?
USB permission
cp /home/user/stlink/49-stlinkv*.rules /etc/udev/rules.d udevadm control --reload-rules
For ST-LinkV1 take a look at the readme.txt before first plug in with PC !
Howto
Connect the ST-Link to the MCU. If a complete stm32fx-discovery board is used, CN3 jumpers need to be set. To program a external MCU, remove CN3 jumpers and connect the external MCU with the SWD header.