NavStik

From PaparazziUAV
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Tudelft logo.jpg
The NavStik main autopilot board

Overview

The NavStik autopilot comes from NavStik and consists of a main board with several breakout boards. Until now we have 3 flavours in the breakout board, the IvyPRO, the IvyEZ and the IvyLITE. Each of these breakout boards have different specifications, but since the main board contains all the sensors they will never change. Next to the autopilot it has the capability to add a Gumstix Overo on top for more processing power.

Key Features

The NavStik main board consists of the following main features:

  • 3-axis Accelerometer
  • 3-axis Gyroscope
  • 3-axis Magnetometer
  • Barometer (Static Pressure Sensor)
  • GPS (Optional)
  • Temperature Sensors for Temperature Compensation of Sensor Data
  • Cortex M4 Based Microcontroller (STM32F4: 32 bit, 168 MHz)
  • Onboard SPI Flash with 16 Mb Memory
  • Connectors for Interface Board (required for power and interface to external world)
  • Connectors for Gumstix Overo® (optional – available from Gumstix; for advanced applications)
  • Connector for GPS Antenna (optional; required for GPS applications)
  • Differential Pressure Sensor (optional; for air-speed estimation)
  • Power Regulators and Switches (for programmatically controlling power to different subsections)

Breakout Boards

Since the NavStik doesn't have any real connectors or power management you will need a breakout board for your autopilot to make it fully functional. In this section we will give you a short overview of the three different breakout boards.

Features IvyPRO IvyEZ IvyLITE
PWM In/Out 6 (0.1” Headers) + 6 (JST-SH Connector) 6 (0.1” Headers) + 6 (JST-SH Connector) 6 + 6 (All Pads)
Micro SD Card YES (Push-Push Type) YES (Header Type) YES (Header Type)
Port for Telemetry (UART) YES (JST-SH) YES (JST-SH) YES (Pads)
NavStik USB Port(s) 2 (Micro-USB, JST-SH) 1 (Micro-USB) 2 (Micro-USB, Pads)
Port for Spektrum (UART) YES (JST-SH) NO NO
Ports for Gumstix Overo® UART, USB (2) NONE UART, USB
Debug Port (for IvyGS) YES YES* YES
Current Measurement YES NO NO
Battery Voltage Monitor YES YES NO
Input Voltage Range 4.5V – 14.0V 3.5V – 5.5V 4.0V – 5.5V
ESD, Short-Circuit Protection YES YES YES
Auto Power Switching YES YES YES
Cost +++++ +++ +++
Size 41mm x 35mm 41mm x 17mm 35mm x 17mm
Weight ˜8.6 gram ˜5 gram ˜3.2 gram