Difference between revisions of "Multiple Parrot Drones as Swarm via WiFi Router"

From PaparazziUAV
Jump to: navigation, search
m (kickoff page with multiple Parrot drones in one network)
(Prepare the Bebop)
Line 12: Line 12:
  
 
=Prepare the Bebop=
 
=Prepare the Bebop=
 +
 +
There is a configuration to make. Here are some examples as a start:
 +
 +
<code>
 +
cd ~/paparazzi/sw/tools/parrot
 +
 +
./bebop.py configure_network YOURROUTERSSID managed dhcp
 +
 +
./bebop.py wifikey none none
 +
 +
</code>
 +
 +
or if you have WPA2 and  fixed IP's and do not have set the MAC of your Bebop in your DHCP for a static lease. IP is an example, your router could be on a different subnet.
 +
Ofcourse change the YOURROUTERSSID and YOURKEY to the SSID of your router end the password of your network.
 +
 +
<code>
 +
cd ~/paparazzi/sw/tools/parrot
 +
 +
./bebop.py configure_network YOURROUTERSSID managed 192.168.1.44
 +
 +
./bebop.py wifikey wpa2 YOURKEY
 +
 +
</code>
  
 
=TIPS=
 
=TIPS=
  
 
Press and hold the Powerbutton for 10seconds in a row until the light turns red, that is a factory reset.
 
Press and hold the Powerbutton for 10seconds in a row until the light turns red, that is a factory reset.

Revision as of 10:02, 4 September 2020

Multiple Parrot Drones as Swarm via WiFi Router

About

If you are eager to try and fly multiple Bebop or Discos at the same time and communicate to each-other, this is the page to read hot to get that to work

What your need

  • 2x Bebop
  • 1x Router
  • Your Fieldlaptop

Prepare the Bebop

There is a configuration to make. Here are some examples as a start:

cd ~/paparazzi/sw/tools/parrot

./bebop.py configure_network YOURROUTERSSID managed dhcp

./bebop.py wifikey none none

or if you have WPA2 and fixed IP's and do not have set the MAC of your Bebop in your DHCP for a static lease. IP is an example, your router could be on a different subnet. Ofcourse change the YOURROUTERSSID and YOURKEY to the SSID of your router end the password of your network.

cd ~/paparazzi/sw/tools/parrot

./bebop.py configure_network YOURROUTERSSID managed 192.168.1.44

./bebop.py wifikey wpa2 YOURKEY

TIPS

Press and hold the Powerbutton for 10seconds in a row until the light turns red, that is a factory reset.