Difference between revisions of "Lisa/S"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
[[File:tudelft_logo.jpg|left| | [[File:tudelft_logo.jpg|left|120px|link=http://tudelft.nl/en/]] | ||
[[File:1bitsquared_logo.png|left|120px|link=http://1bitsquared.com]] | |||
[[Image:Lisa S V0 1 r2 on finger.jpg|300px|right]] | [[Image:Lisa S V0 1 r2 on finger.jpg|300px|right]] | ||
| Line 53: | Line 54: | ||
== Availability == | == Availability == | ||
[[File:1bitsquared_logo.png|100px|link=http://1bitsquared.com]] | |||
As of 2013-11-27 Lisa/S is available for pre-order from [http://1bitsquared.com/products/lisa-s-starter-kit 1 BIT SQUARED]. | As of 2013-11-27 Lisa/S is available for pre-order from [http://1bitsquared.com/products/lisa-s-starter-kit 1 BIT SQUARED]. | ||
Revision as of 22:27, 27 November 2013
Lisa/S
Lisa/S is a very small general purpose autopilot. The main goal of creating an autopilot of minimal size and weight, while providing a lot of functionality is achieved:
- Size: 20mm x 20mm x 5mm (0.787" x 0.787" x 0.197")
- Weight: 2.8g (0.1oz)
Features
- 72MHz 32bit ARM Cortex M3 MCU with 16KB RAM and 512KB Flash
- Combined 3 Axis Gyroscope and 3 Axis Accelerometer
- 3 Axis Magnetometer
- Barometer (Altimeter)
- Onboard U-Blox GPS
- Pads to simply connect a Superbit CYRF RC and telemetry module
- Switching buck/boost converter allowing wide range of power input making it perfect and stable for operation from a 1S LiPO cell.
- 2 MOSFET switches connected to PWM output channels
- 6 PWM (servo) outputs
- 1 debug UART port
- 1 CAN interface
- 1 Bind/Boot tact switch
- SWD programming/debugging interface
- Size: 20mm x 20mm x 5mm (0.787" x 0.787" x 0.197")
- Weight: 2.8g (0.1oz)
Pictures
So if you are ready to make your tiny plane fly autonomously,you can already order one here
Pinout
TODO
Block Diagrams
TODO
Schematics
Availability
As of 2013-11-27 Lisa/S is available for pre-order from 1 BIT SQUARED.