Difference between revisions of "Lisa/M v1.0"

From PaparazziUAV
Jump to navigation Jump to search
(added jumper conf tables)
Line 248: Line 248:
There are a number of jumpers on Lisa/M used to configure voltage levels and power input.
There are a number of jumpers on Lisa/M used to configure voltage levels and power input.


NEED TABLES AND DESCRIPTION OF JUMPER CONFIGURATION.
NEED TABLES AND DESCRIPTION OF JUMPER CONFIGURATION. CHECK THIS, UNVERIFIED.
 
{|border="1"  cellspacing="0" style="text-align:center" cellpadding="2%" width="70%"
|+'''Power Jumper Configuration'''
!width="7%"|''Jumper''!!width="20%"|''Bus Connection''!!width="7%"|''Default''!!''Description''
|-
|JP1||SERVO_BUS to V_IN||OPEN||Connects servo header voltage rail SERVO_BUS to autopilot input voltage V_IN rail on I2C1/CAN connector
|-
|JP2||V_BAT to V_IN||OPEN||Connects I2C1/CAN rail V_BAT to autopilot input voltage V_IN rail
|-
|JP3||V_IN to +5V||OPEN||Connects autopilot input voltage V_IN rail to autopilot +5V rail, bypassing onboard 5V supply
|}
 
 
{|border="1"  cellspacing="0" style="text-align:center" cellpadding="2%" width="70%"
|+'''UART1 VCC Configuration'''
!width="7%"|''Jumper''!!width="20%"|''Bus Connection''!!width="7%"|''Default''!!''Description''
|-
|JP6||UART1_VCC to V_IN||OPEN||Connects UART1 connector VCC to autopilot input voltage V_IN rail
|-
|JP7||UART1_VCC to +3V3||style="background:black; color:white"|CLOSED||Connects UART1 connector VCC to autopilot +3V3 rail
|}
'''WARNING: DO NOT CLOSE BOTH JP6 AND JP7 SIMULTANEOUSLY!!!'''
 
 
{|border="1"  cellspacing="0" style="text-align:center" cellpadding="2%" width="70%"
|+'''UART2 VCC Configuration'''
!width="7%"|''Jumper''!!width="20%"|''Bus Connection''!!width="7%"|''Default''!!''Description''
|-
|JP4||UART2_VCC to V_IN||OPEN||Connects UART2 connector VCC to autopilot input voltage V_IN rail
|-
|JP5||UART2_VCC to +3V3||style="background:black; color:white"|CLOSED||Connects UART2 connector VCC to autopilot +3V3 rail
|}
'''WARNING: DO NOT CLOSE BOTH JP4 AND JP5 SIMULTANEOUSLY!!!'''
 


=== Powering the Board ===
=== Powering the Board ===

Revision as of 20:49, 8 March 2012

Lisa/M V1.0 top view

NOTE: THERE IS A NEW VERSION OF LISA/M AVAILABLE

Lisa/M is a small, general purpose autopilot designed with flexibility across multiple applications in mind. Small weight and size, with (optional) integrated Aspirin IMU and full size 0.1" servo headers make the Lisa/M suitable for both fixed-wing and rotorcraft vehicles. This autopilot is based on the STM32 for improved peripherals and faster processing.

A number of tutorials are being prepared for getting started with Lisa/M:

Hardware Revision History

Version # Release Date Release Notes
v1.0 MM/YYYY Lisa/M Initial Production Release
v0.1 MM/YYYY Initial prototype of Lisa/M

For detailed hardware revision history, please see below.

Features

Lisa/M is based on the 64 pins STM32F105RCT6 connectivity line family processor featuring 64k of RAM and 256k of FLASH. All the pins are exposed, providing access to the complete set of the STM32 peripherals. NOTE: This MCU is different from LISA/L. Lisa/L is based on the 64 pins STM32F103RE processor featuring 64k of RAM and 512k of FLASH, which is part of the high-density performance line family.

  • STM32 microcontroller STM32F105RCT6 datasheet with 256kB flash and 64kB RAM
  • Pressure sensor BMP085
  • 7 x Analog input channels
  • 3 x Generic digital in-/out-puts
  • 2 x 3.3V TTL UART (5V tolerant)
  • 7 x Servo PPM outputs
  • 1 x CAN bus
  • 1 x SPI bus
  • 1 x I2C bus
  • 1 x Micro USB
  • 4 x status LEDs with attached test point
  • 10.8 grams (0.4 oz) (with Aspirin IMU mounted)
  • 9.9 grams (0.35 oz) (without Aspirin IMU mounted)
  • ~33mm x ~56mm x ~10mm
  • 4 layers PCB design

with mounted Aspirin IMU has the following additional sensors on board:

  • 3 Axis Gyroscope
  • 3 Axis Accelerometer
  • 3 Axis Magnetometer

The pressure sensor is mounted directly on the board as this sensor is not provided by Aspirin (v0.1 - v1.1).

In short, you only need to add a high quality GPS module and then you have all necessary sensors for full attitude and altitude stabilization in an extremely small package.

Pinout

Pins Name and Type are specified with respect to the Autopilot Board.

LisaM V1 0 top labeled.png

SERVO1/2/3/4/5/6/7
Pin # Name Type Description Color
1 SERVOx OUT Servo signal (PWM) Yellow
2 SV PWR Servo Bus Voltage Rail Red
3 GND PWR common ground Black


JTAG
Pin # Name Type Description Color
1 N/A N/A JTAG Debug Header None


UART1
Pin # Name Type Description Color
1 GND PWR common ground Black
2 +3V3 PWR UART Voltage (conf w/ JP6 and JP7) Red
3 TX OUT USART1 Serial Output (3.3V level) Yellow
4 RX IN USART1 Serial Input (3.3V level, 5V Tolerant???) Orange


UART3/5
Pin # Name Type Description Color
1 GND PWR common ground Black
2 +3V3 PWR 3.3V Rail from autopilot Red
3 RX3 IN USART3 Serial Input (3.3V level) Orange
4 GND PWR common ground Black
5 +3V3 PWR 3.3V Rail from autopilot Red
6 RX5 IN USART5 Serial Input (3.3V level) Orange


GPIO
Pin # Name Type Description Color
1 GND PWR common ground Black
2 +3V3 PWR 3.3V Rail from autopilot Red
3 PC10 I/O GPIO PC10 Pink
4 PC12 I/O GPIO PC12 Dark Tan
5 TRST I/O JTAG_TRST Light Tan


ANALOG2 (if Populated)
Pin # Name Type Description Color
1 GND PWR common ground Black
2 +3V3 PWR 3.3V Rail from autopilot Red
3 +5V PWR 5V Rail from autopilot Red
4 ADC4 I/O ADC4 Magenta
5 ADC6 I/O ADC6 Pink
6 BOOT I/O BOOT Grey


USB
Pin # Name Type Description Color
1 N/A N/A USB None


I2C1 CAN
Pin # Name Type Description Color
1 GND PWR common ground Black
2 V_BATT PWR V_BAT Bus on autopilot, voltage divider for V_BAT_MEAS, (use JP2 to connect to V_IN) Red
3 V_IN PWR Connected to autopilot voltage regulator inputs (conf w/ JP1, JP2 and JP3) Red
4 CANL I/O CANL Orange
5 CANH I/O CANH Yellow
6 SCL I/O SCL Green
7 SDA I/O SDA Blue


SPI1
Pin # Name Type Description Color
1 GND PWR common ground Black
2 +3V3 PWR 3.3V Rail from autopilot Red
3 MOSI Out MOSI Orange
4 MISO In MISO Yellow
5 SCK Out SCK Green
6 SS Out SS Blue
7 DRDY I/O DRDY Dark Tan


ANALOG1
Pin # Name Type Description Color
1 GND PWR common ground Black
2 +3V3 PWR 3.3V Rail from autopilot Red
3 +5V PWR 5V Rail from autopilot Red
4 ADC1 In ADC4 Green
5 ADC2 In ADC6 Blue
6 ADC3 In BOOT Light Tan


UART2
Pin # Name Type Description Color
1 GND PWR common ground Black
2 VCC PWR UART Voltage (conf w/ JP4 and JP5) Red
3 TX OUT USART2 Serial Output (3.3V level) Yellow
4 RX IN USART2 Serial Input (3.3V level, 5V Tolerant???) Orange


I2C2
Pin # Name Type Description Color
1 GND PWR common ground Black
2 +3V3 PWR 3.3V Rail from autopilot Red
3 SCL I/O SCL Green
4 SDA I/O SDA Blue


Jumper Configuration

There are a number of jumpers on Lisa/M used to configure voltage levels and power input.

NEED TABLES AND DESCRIPTION OF JUMPER CONFIGURATION. CHECK THIS, UNVERIFIED.

Power Jumper Configuration
Jumper Bus Connection Default Description
JP1 SERVO_BUS to V_IN OPEN Connects servo header voltage rail SERVO_BUS to autopilot input voltage V_IN rail on I2C1/CAN connector
JP2 V_BAT to V_IN OPEN Connects I2C1/CAN rail V_BAT to autopilot input voltage V_IN rail
JP3 V_IN to +5V OPEN Connects autopilot input voltage V_IN rail to autopilot +5V rail, bypassing onboard 5V supply


UART1 VCC Configuration
Jumper Bus Connection Default Description
JP6 UART1_VCC to V_IN OPEN Connects UART1 connector VCC to autopilot input voltage V_IN rail
JP7 UART1_VCC to +3V3 CLOSED Connects UART1 connector VCC to autopilot +3V3 rail

WARNING: DO NOT CLOSE BOTH JP6 AND JP7 SIMULTANEOUSLY!!!


UART2 VCC Configuration
Jumper Bus Connection Default Description
JP4 UART2_VCC to V_IN OPEN Connects UART2 connector VCC to autopilot input voltage V_IN rail
JP5 UART2_VCC to +3V3 CLOSED Connects UART2 connector VCC to autopilot +3V3 rail

WARNING: DO NOT CLOSE BOTH JP4 AND JP5 SIMULTANEOUSLY!!!


Powering the Board

The 3.3V regulator on Lisa/M is a MIC5209-3.3YM capable of delivering up to 500mA. While it is possible to power this regulator with up to 16V, experience has shown that this regulator can become very hot in operation with high input voltages, resulting in potential thermal shutdown while in flight. Depending on the expected current draw, it is best to power this regulator with a lower voltage. 5V is the perfect choice.

Schematic


Examples of Airborne Equipment Electrical Connections

Small Aircraft Connection Diagram

Need an Umarim_v1.0-style ( here) small aircraft airborne equipment electrical connections here.

Large Aircraft Connection Diagram

Need an Umarim V1.0-style ( here) large aircraft airborne equipment electrical connections diagram here.

R/C Receivers

There is Spektrum parser available already, enabling the direct use of 1 or 2 Spektrum satellite receivers.

Also UART pins can be used as general purpose I/O to be used for PPM input. Additionally PPM encoder can be used to avoid receiver hardware modification.


PCB

Gerber & Drill Files

Download Lisa/M v1.0 gerber & drill files (zip) NOT YET AVAILABLE BUT SEE Downloads Need some generated gerbers and drill files here.

Assembly

Components Layout

NOT YET AVAILABLE BUT SEE Downloads Need some top and bottom of board images and line drawings here.

Bill Of Material

Download Lisa/M v1.0 Bill Of Material (zipped .xls file) NOT YET AVAILABLE BUT SEE Downloads

PCB and assembled boards suppliers

Available on Get Hardware page, hopefully :)


Mechanical Dimensions

Lisa/M v1.0 Mechanical Dimensions

Downloads

Source files

Gerber & Drill files

  • download NOT YET AVAILABLE Need generated gerbers and drill files

Assembly files

  • download NOT YET AVAILABLE Need Lisa/M v1.0 Components layouts (pdf)
  • download NOT YET AVAILABLE Need Lisa/M v1.0 Bill Of Material

Upload firmware

Uploading firmware onboard USB is not possible with this boart. The boords need hardware modification to make it possible. A very nice way to upload, a.k.a. flashing new Paparazzi code to the board is to use a JTAG adapter. Less convinient since it tke aspecial adapte. But this adapter makes it more conveniet when testing one does not need to repower the board to reflash. And flashing via JTag cable is very fast. Also debugging the autopilot is ver handy with JTAG.

Required components

Connection Diagram

Boot Sequence

JTAG

JTAG can be used to upload firmware if no bootloader as present. It can also be used for debugging.


Detailed Hardware Revision History

Changes Between v0.1 and v1.0

  • Switched to stm32f105 to be able to use usb and can at the same time
  • Added alternative use of the adc lines as led output
  • ...

Hardware Change Requests

  • REQ: Replace BMP085 with MS5611 (the MS5611 seems to be better in performance then the BMP but it is more expensive and seems to be more difficult to obtain.
    • A: This upgrade will be available through Aspirin v2.0 --Esden 22:54, 5 January 2012 (CET)
  • REQ: Replace 7 Pin CAN with molex with something less risky to be inserted in 7 Pin SPI in relation to powering the board via CAN molex.
  • REQ: Separate spot for external power if powered via separate battery. Realizing we can via Servo ports by Bridge J1 but still like to measure board voltage then and have a way to add power without mistakenly inject CAN Molex into SPI.