Difference between revisions of "Get Hardware"

From PaparazziUAV
Jump to navigation Jump to search
Line 58: Line 58:
Although the website is new , we hope to have stocks of almost everything you will need , and other rc supplies too .
Although the website is new , we hope to have stocks of almost everything you will need , and other rc supplies too .


<h2>"Halfbase"  Mass Produce PCB</h2>
<h2>"Halfbase"  Mass Produce PCB [http://shop.halfbase.com Your Benefit!]</h2>


To be cost effective, 3 metres square of PCB produced & tested!  ~ over 1000pcs made<br><br>
To be cost effective, 3 metres square of PCB produced & tested!  ~ over 1000pcs made<br><br>
Line 64: Line 64:
'''Bare PCB Tiny V2.11''':--  '''USD $4 each'''
'''Bare PCB Tiny V2.11''':--  '''USD $4 each'''
   
   
Over 10's  '''USD $3'''<br>
    10's  '''USD $3'''<br>
Over 50's  '''USD $2'''<br>
    50's  '''USD $2'''<br>
Over 100's  " USD $0.9" <br>
    100's  " USD $0.9" <br>
Over 200's  " USD $0.5" <br>
    200's  " USD $0.5" <br>
<br>  
<br>  
''' ~ PCB Next day is ready for shipping!  Kit has no lead time currently, stock availiable!
''' ~ PCB Next day is ready for shipping!  Kit also has no lead time currently, stock availiable!'''<br>
'''<br>


▪      Tiny V.2.11 Assembled $285    Kits - $185  Wholesale availiable <br>
▪      Tiny V.2.11 Fully Assembled + USB Cable $285    Kits - $185  Wholesale availiable <br>
▪      '''Now ~  All Kit included "USB Programming Cable"!! ~ Class 3 Standard !'''<br><br>
▪      '''Now ~  All Kit included "USB Programming Cable"!! ~ Class 3 Standard !'''<br><br>
▪ 1-Axis IR bare PCB: $3<br>
 
▪ 2-Axis IR bare PCB: $3 <br>
▪ 1-Axis IR bare PCB: $3<br>
▪ MLX90247 IR sensors: $8 <br>
▪ 2-Axis IR bare PCB: $3 <br>
▪ MLX90247 IR sensors: $8,    OEM  IR sensors: $5,    "UltraSonic Sensor  (Transmit/receive) $10/pair" <br>
▪        UltraSonic Senor Modern:  $60 <br>  
▪ 2-Axis IR board with IR sensors: $55 <br>
▪ 2-Axis IR board with IR sensors: $55 <br>
▪ 1-Axis IR board with IR sensors: $35 <br>
▪ 1-Axis IR board with IR sensors: $35 <br>
▪ u-blox LEA-4P $55 / LEA-5H GPS module: $50 <br>
▪ u-blox LEA-4P $55 / LEA-5H GPS module: $50 <br>
      USB Programming Cable $10
        USB Programming Cable $10
      Picoblade 1.25mm (3/4/5/7/8)Pins, Male/Famale x 10  $1 Only!
        '''~  Picoblade 1.25mm (3/4/5/7/8)Pins, Male/Famale x 10  $1 Only! ~'''




Visit [[shop.halfbase.com]][http://shop.halfbase.com]
Visit [[shop.halfbase.com]][http://shop.halfbase.com]
Send your require order to sale@halfbase.com
Send your require order to sale@halfbase.com
<br>


''All Profit make will use for getting up a project base charity!''<br><br>
''All profit we made, fully goes into a Project base charity we currently establishing.''<br>
'''Aims to provide learning platform for school & institute, recruit interesting voluntary party to take parts, 
in assisting & directing, lecturing & engineering those project ideas into reality, wisely & openly.  
We're working toward to a successful & sustainable establishment, and smooth project invention growing!'''

Revision as of 10:59, 30 May 2008

The Paparazzi project began in 2003 with the goal of creating a free and open-source UAV guidance system which could be easily adapted to a wide variety of aircraft for a wide variety of applications. The system has since proved to be extremely successful and Paparazzi-based aircraft have won all top positions in every flight contest in which they competed.

As an open-source project, all source code and hardware plans are freely available on the internet for anyone to produce, use, modify, and redistribute in accordance with the GPL License Agreement which requires only that the open-source nature of the project be maintained by all who redistribute it.

Paparazzi is currently being developed by several universities and a team of enthusiast volunteers from around the world. It is used by private corporations, universities and hobbyists for an ever-increasing number of applications.


Paparazzi UAV Online PPZUAV

Good news. We have your Paparazzi Project PCB and Assembled Paparazzi Hardware at PPZUAV Website: www.ppzuav.com

PPZUAV has made available to everyone virtually every Paparazzi Project component including mostly and fully assembled autopilots, PCB and accessories.

PPZUAV uses all major carriers (US Postal, UPS, FedEx) for your shipping. We also carry cables, and other items you will need to get your Paparazzi Project off the ground.

All Assembled Tiny2.11 are factory assembled using robotic pick and place machines.

Visit the PPZUAV WebStore

PPZUAV also makes getting started easier. Each Fully Assembled Tiny2.11 order is programmed with the USB Boot Software, GPS Module Configured before shipping. All you need is a USB cable and the Paparazzi Project Software to start programming. eMail sales@ppzuav.com with any questions or requests.

NOTE on SHIPPING: Those who wish to use US Postal Service to save costs. USPS does not guarantee International (non USA) shipments greater than 45.00. Please select an appropriate carrier based on the value of your order when ordering.
Flat-Rate = FedEx Intl Priority 2-day, Insured with online tracking information, shipping

Please check the PPZUAV website often as we expand our product offering.

Mantis Electronics (Website)

Mantis Electronics is pleased to offer assembled Tiny 2.11, IR boards, GPS modules, USB-TTL interface boards, 3-Axis I2C/SPI accelerometer boards, and accessories for immediate order. Our boards are solder paste stencilled, reflow soldered and 100% tested.

Our Items:

  • Tiny 2.11 assembled with LEA-4P and GPS antenna: $250 ($260 with Molex Picoblade connectors)
  • 2-Axis IR board with IR sensors: $75
  • 1-Axis IR board with IR sensors: $55
  • u-blox LEA-4P GPS module: $75
  • USB<->TTL Serial board: $15 (useful for programming and telemetry)
  • 3-Axis I2C/SPI accelerometer board: $35
  • MLX90247 IR sensors: $12
  • Tiny 2.11 bare PCB: $10
  • 2-Axis IR bare PCB: $5
  • 1-Axis IR bare PCB: $5

Current lead time for orders is 3 weeks. USA shipping is $6. International shipping is $15.
Please see our website http://mantiselec.com/paparazzi.html to order.

RCTECHNIX

After numerous requests i am working on supplying all pcb's , parts , gps etc and will be fully supporting the paparazzi projects now and in the future , so please bear with Richard & Myself David (cncbasher), whilst we gather stocks and manufacture pcb's etc , enquirys can be made direct to paparazzi.pcb@rctechnix.com if you wish , a web site is in the process( now up and running see below ) of being put together which will incorporate sales of everything papparazzi , we will even help in getting your own built projects going if you are stuck so long as it's paparazzi based ! too , Bare PCB'S are now available for tiny13 v1.1 , classix v0.99 & dual_ir incl free 1st class postage ,whilst we work on getting the shop up and running if you need bare pcb's , they can be purchased using Paypal from our website http://www.rctechnix.com . we are currently assembling a few for testing and will announce availability shortly of assembled boards and complete kits , along with wiring harness's , usb lead's , gps , antennas & zigbee modules etc.

Although the website is new , we hope to have stocks of almost everything you will need , and other rc supplies too .

"Halfbase" Mass Produce PCB Your Benefit!

To be cost effective, 3 metres square of PCB produced & tested! ~ over 1000pcs made

Bare PCB Tiny V2.11:-- USD $4 each

    10's  USD $3
50's USD $2
100's " USD $0.9"
200's " USD $0.5"


~ PCB Next day is ready for shipping! Kit also has no lead time currently, stock availiable!

▪ Tiny V.2.11 Fully Assembled + USB Cable $285 Kits - $185 Wholesale availiable
Now ~ All Kit included "USB Programming Cable"!! ~ Class 3 Standard !

▪ 1-Axis IR bare PCB: $3
▪ 2-Axis IR bare PCB: $3
▪ MLX90247 IR sensors: $8, OEM IR sensors: $5, "UltraSonic Sensor (Transmit/receive) $10/pair"
▪ UltraSonic Senor Modern: $60
▪ 2-Axis IR board with IR sensors: $55
▪ 1-Axis IR board with IR sensors: $35
▪ u-blox LEA-4P $55 / LEA-5H GPS module: $50
▪ USB Programming Cable $10 ▪ ~ Picoblade 1.25mm (3/4/5/7/8)Pins, Male/Famale x 10 $1 Only! ~


Visit shop.halfbase.com[1] Send your require order to sale@halfbase.com

All profit we made, fully goes into a Project base charity we currently establishing.
Aims to provide learning platform for school & institute, recruit interesting voluntary party to take parts,  in assisting & directing, lecturing & engineering those project ideas into reality, wisely & openly.   We're working toward to a successful & sustainable establishment, and smooth project invention growing!