GPS/BU 353

From PaparazziUAV
Jump to navigation Jump to search
BU-353 GPS receiver

Our goal is to adapt the USGlobalsat BU-353 GPS receiver to work with the Parrot AR.Drone 2.0. In this part some general specifications of the sensor are given.

Type of GPS sensor

The GPS sensor we use for this project is as said before the BU-353 USB GPS Receiver from US Globalstat. This receiver is compatible with systems running Windows, MAC OS and Linux. Therefore the receiver is to use for each application. The receiver sends the data through the USB cable to the system. The data send by the receiver is SiRF binary or NMEA 0183.

Configuration

To use the sensor the system must be configured to receive the sended data correctly. Because we use a Linux system the configuration for such a system is explained. The used Baudrate of GPS sensor is 4800. The receiver transmits no parity bit. The number of bits transmitted by the receiver is 8 followed by 1 stop bit. The system must be configured to receive correct data. The default settings of a Linux system are receiving no parity bit, 8 data bits and 1 stop bit. In most cases you only have to set the Baudrate to 4800.

Data transmitted by GPS

The receiver tranmists data to your system. The default format sent by the receiver is the NMEA 0183 standard. NMEA consists of sentences, the first word of which, called a data type, defines the interpretation of the rest of the sentence. Each Data type would have its own unique interpretation and is defined in the NMEA standard. There are many sentences but our receiver is only able to receive some of them. The types the receiver is able to handle are: GGA, GSA, GSV, RMC, VTG and GLL. The last two datatypes are optional.