Explorer/RaspberryPi

From PaparazziUAV
Revision as of 09:28, 22 June 2020 by Xp31 (talk | contribs)
Jump to navigation Jump to search

Download and install raspbian (debian for raspberry) lite package (same for PI3 and PIzero)
Raspberry Pi OS (32-bit) Lite (buster : 433M)

 wget https://downloads.raspberrypi.org/raspbian_lite_latest
 mv raspbian_lite_latest raspbian_lite_latest.zip
 ./balenaEtcher-1.5.79-x64.AppImage


Initial configuration: PI3 and PIZero can be configured headless, without a keyboard and a display.
You just need to configure the board to connect to a wifi hotspot when power on.

  • Plug the memory SD card with the fresh raspbian installed.

Create file (sudo touch)

 boot/ssh

Create the file with following content (sudo vi)

 boot/wpa_supplicant.conf
 "
 ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
 update_config=1
 country=FR
 network={
   ssid="Androidxp"
   psk="pprzpprz"
 }
 network={
   ssid="pprz_router"
   key_mgmt=NONE
 }
 "
  • Plug the SD memory card in the raspberry Pi and power on.
  • Connect your computer to the same wifi hotspot
  • Look for the Raspberry IP on the network
nmap -sn 192.168.1.0/24
  • Connect to the identified IP
 ssh pi@...
 password: raspberry
  • Set the configuration
 sudo raspi-config
 1) change user password
 5) P1) enable camera
 7) advanced options
   A1) expand filesystem
 /etc/hosts
 127.0.1.1       raspberrypi
 to 127.0.1.1       airpi or groundpi
 /etc/hostname
 raspberrypi to airpi or groundpi
/etc/dhcpcd.conf
"
interface eth0
static ip_address=192.168.3.2/20
static routers=192.168.3.1
"
 

Explorer/RaspberryPi/BackupRestore