Difference between revisions of "Developer Guide"

From PaparazziUAV
Jump to: navigation, search
(add booz redesign page)
m
Line 1: Line 1:
 +
== A great resource for in-depth information. ==
 +
 +
You are welcomed to enhance and extend this documentation.
 +
 
*[[DevGuide/Communications|Communications<br><small>how telemetry and datalink is done</small>]]
 
*[[DevGuide/Communications|Communications<br><small>how telemetry and datalink is done</small>]]
 
*[[DevGuide/USBDownload|USB Download<br><small>how the Paparazzi USB bootloader works</small>]]
 
*[[DevGuide/USBDownload|USB Download<br><small>how the Paparazzi USB bootloader works</small>]]
 +
*[[BootloaderUploadHowTo|Upload Bootloader<br><small>How to upload the Bootloader to the AP board</small>]]
 
*[[DevGuide/Values|Values<br><small>a short walk through the system</small>]]
 
*[[DevGuide/Values|Values<br><small>a short walk through the system</small>]]
 
*[[DevGuide/JTAG-Debug|JTAG-Debug<br><small>using JTAG debug for LPC2148</small>]]
 
*[[DevGuide/JTAG-Debug|JTAG-Debug<br><small>using JTAG debug for LPC2148</small>]]
 
*[[DevGuide/DesignOverview|DesignOverview<br><small>Attempt at a longer walk through the airborne code architerture</small>]]
 
*[[DevGuide/DesignOverview|DesignOverview<br><small>Attempt at a longer walk through the airborne code architerture</small>]]
 
*[[DevGuide/USB-Serial|USB-Serial<br><small>using the USB instead of the UART for telemetry</small>]]
 
*[[DevGuide/USB-Serial|USB-Serial<br><small>using the USB instead of the UART for telemetry</small>]]
*[[DevGuide/BoozDesign| Booz Design<br><small>Redesign of the Booz airborne code architecture</small>]]
+
*[[DevGuide/BoozDesign|Booz Design<br><small>Redesign of the Booz airborne code architecture</small>]]
 +
*[[Install_paparazzi_and_everything_from_scratch| Toolchain<br><small>Install Paparazzi ARM toolchain and IVY from scratch</small>]]

Revision as of 04:15, 29 June 2010

A great resource for in-depth information.

You are welcomed to enhance and extend this documentation.