Difference between revisions of "ADS-B"

From PaparazziUAV
Jump to navigation Jump to search
m (Add image)
m (float to the right)
Line 1: Line 1:
{|
[[Image:Intruder.JPG|thumb|right|400px|ADSB Intruder in GCS]]
|[[Image:Intruder.JPG|thumb|400px|ADSB Intruder in GCS]]
|
|
|}
 
== General information ==
== General information ==



Revision as of 15:25, 5 March 2013

ADSB Intruder in GCS

General information

ADS-B is an addition to transponders of manned aircraft which transmits position and velocity data. link Wikipedia

The idea is to use this information to stay safe of these aircraft.

WARNING: Not all aircraft are equipped with this system, it can just be an aid in situational awareness!

It can be used in conjunction with the TCAS functionality: Paparazzi TCAS

Receiver and integration

Originally ADS-B receivers are expensive.

But now there is the opportunity to use DVB USB sticks as cheap software defined radios covering the required frequency.

Here we use the following projects:

Both need to be installed as documented on their homepages.

dump1090 is then started with the --net option to open a server supplying the information on port 30033 The option --interactive nicely shows which planes are received and in your browser at http://localhost:8080/ you can see it on a map.

The integration to paparazzi is realized through a module reading the port of dump1090 and forwarding it to the IVY bus. Additionally it reads the data of the corresponding UAV through IVY to calculate a distance.

Use

  • To show the intruder in the GCS and have it broadcasted, build an A/C in Paparazzi Center called Intruder with the ID 99.
  • Start a Paparazzi Session, probably a simulation for the start...
  • Start ivy_sbs_bridge AC-ID, with AC-ID being the ID of the flying UAV for distance calculations.

Code: ivy_sbs_bridge Code (To be integrated in git soon...)

Some information is provided in a small window.

The tool connects to localhost, if no dedicated SBS server and port is given after AC-ID

Demonstration Video

ADSB to Paparazzi Video

The standard DVB antenna was standing in the middle of the room... These receivers are really sensitive.

Possible expansions

  • Forward more than one intruder to the system (should be easy, if necessary)
  • Output a warning if a non-ADS-B transponder is received at the UAV's altitude (many general aviation aircraft have only Mode C/S transponders)
  • Additionally receive FLARM since this is widely used in gliders. This was already done badly coded. Drawback is, the receivers cost several hundred Euros.